KR – 2 Folding Electric Bike (Ex Demo Model)

Product Maintenance

NB: It is the responsibility of the rider or a competent person to do a daily visual inspection on their bike or Scooter, before using each time.

Here is a checklist of what to look for:

• Handlebars & Neck – ensure they are secure and not loose. Pull the front brake and rock the e-bike or scooter forward and backward. There should be no play in the handlebar mount. Tighten if needed and re-test.
• Inspect Your Brakes. Make sure the bolts on your brake callipers are tight, so the callipers don’t wobble. Tighten as needed. Brakes should be regularly adjusted by the Barrell adjuster on the Brake Lever and Calliper to obtain optimal braking efficiency. Brake Cables should be checked and made sure they are moving freely and not sticking when applying brakes.
• Wipe down frame. Take a rag and wipe the frame of the e-bike. Whilst doing so inspect for any damage and cracks.
• Check Wheel Tightness. Check that each wheel’s axle nuts are tight and there’s no wheel wobble. Tighten as needed.
• Check Tyre Pressure: Check the side wall of your Tyre For manufacturers recommendation of tyre pressure and inflate accordingly.
• Check Tyres for any foreign objects and Tyre thread should be at least 1mm in centre of tyre.
• Chain – check tenson between 3-8mm. With the tyres of your e-bike off the floor, grasp the chain between the back gears and pedals with a clean rag. Spin the pedals a few times so that the chain runs a few cycles through the rag, cleaning off any dirt. Apply lube if necessary.
• Check pedals are not loose.
• Check the battery is fully charged.
• Check the control panel and functions are working correctly.
• Check the Seat is intact, secure and at the correct level.
• Check the front and rear lights are working. ( this is not applicable to all models)
• Inspect your helmet for any damage / cracks. Ensure the fastening clip is in good working order and the helmet fits correctly.